新闻中心

EEPW首页 > 嵌入式系统 > 设计应用 > 采用MachXO的PLD控制开发技术设计

采用MachXO的PLD控制开发技术设计

作者:时间:2012-05-30来源:网络收藏

是非易失的可以无限次重新配置的可编逻辑器件),具有256-2280个查找表(LUT),73-271个I/O,多达27.6Kb sysMEM嵌入区块RAM,多达7.7Kb分布式RAM,可编程的sysIO™缓冲器支持LVCMOS 3.3/2.5/1.8/1.5/1.2,LVTTL.PV和LVDS,Bus-LVDS,LVPECL,RSDS,器件支持3.3V,2.5V,1.8V或1.2V电源,IEEE 1532兼容的在系统编程,主要用在各种终端市场包括消费类电子,汽车电子,通信,计算,工业和医疗。

本文引用地址:http://www.amcfsurvey.com/article/148965.htm


开发套件

Control Development Kit

The MachXOControl Development Kit is a platform for rapidly prototyping system control designs using MachXO PLDs. The kit features the MachXO LCMXO2280 device, Power Manager II ispPAC-POWR1014A, 2 Mbit SPI Flash and 1 Mbit SRAM memory, a temperature sensor, an expansion header for I2C and SPI interfaces, and several LEDs and user switches.

Using the preloadedcontrol system-on-chip (Control SoC) design provided with the development kit, you can now test within minutes boardcontrol functions including fan speed control based on temperature monitoring, LCDcontrol, complete power supply monitoring and reset distribution in conjunction with the Power Manager II POWR1014A and 8-bit LatticeMico8 microcontroller.You can then build your own designs using the free downloadable reference design source code, implementing these features in less than an hour. The board also features USB channels for JTAG programming and debugging from a host PC. A prototype area provides access to a variety of PIO banks of the MachXO PLD and the on-board I2C bus. The board can be controlled with a menu driven interface via terminal programs running on a host PC.

MachXO PLD开发套件主要特性:

The MachXO Control Evaluation Board features the following:

Preloaded Control SoC demo

MachXO LCMXO2280

Power Manager II ispPAC-POWR1014A

2Mbit SPI Flash 1Mbit SRAM

I2C temperature sensor

Current and voltage sensor circuits

On-board fan

Interface to 16 x 2 LCD panel *

SDmemory and Compact Flash memory card sockets *

Audio output channel

Expansion header for SPI I2C

LEDs switches

Standard USB cable for device programming and I2C communication

RS-232/USB JTAG/USB interface

3 x 1 prototyping area

RoHS-compliant packaging and process

图1。MachXO PLD评估板外形图(顶视图)

图2。MachXO LCMXO2280C控制评估板方框图

图3。MachXO LCMXO2280C控制评估板电路:配置

图4。MachXO LCMXO2280C控制评估板电路:Bank 0和Bank 1

图3。MachXO LCMXO2280C控制评估板电路:Bank 2和3

图4。MachXO LCMXO2280C控制评估板电路:Bank 4和5

图5。MachXO LCMXO2280C控制评估板电路:Bank 6和7


上一页 1 2 下一页

评论


相关推荐

技术专区

关闭