器件名称: GP1A073LCS
功能描述: Gap : 5mm Slit : 0.5mm OPIC Output, Snap-in type Transmissive Photointerrupter with Connector
文件大小: 129.79KB 共10页
简 介:GP1A073LCS
GP1A073LCS
Gap : 5mm Slit : 0.5mm *OPIC Output, Snap-in type Transmissive Photointerrupter with Connector
■ Description
GP1A73AJ000F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remotemount or off-board designs.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or motion. 2. Example : PPC, FAX, Printer
■ Features
1. Transmissive with OPIC output 2. Highlights : Special position hooks compatible with 3 different wall thicknesses (1.0, 1.2, 1.6mm) Hinged snap insertion Wide operation voltage (2.7 to 5.5V) 3. Key Parameters : Gap Width : 5mm Slit Width (detector side): 0.5mm Package : 17×12.8×8mm (without connector and hooks) Connector : Tyco Electronics AMP K.K. (PN : 292133-3) or SUMIKO TEC CO., LTD. (PN : GH4A003P000ZA) Output Type : High when the object is present with Pullup Resistor. 4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing
Notice The content of data sheet is subject to change without prior notice. In the absence of conrmation by device specication sheets, SHARP takes no responsibility for any defects that may occur in equipment using an……