器件名称: LM311BN
功能描述: Voltage comparator
文件大小: 71.67KB 共4页
简 介:Philips Semiconductors Linear Products
Product specification
Voltage comparator
LM111/211/311/ LM311B
DESCRIPTION
The LM111 series are voltage comparators that have input currents approximately a hundred times lower than devices like the A710. They are designed to operate over a wider range of supply voltages; from standard ±15V op amp supplies down to a single 3V supply. Their output is compatible with RTL, DTL, and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50mA. Both the inputs and the outputs of the LM111 series can be isolated from system ground, and the output can drive loads referred to ground, the positive supply, or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire-ORed. Although slower than the A710 (200ns response time vs 40ns), the devices are also much less prone to spurious oscillations. The LM111 series has the same pin configuration as the A710 series.
PIN CONFIGURATION
D, FE, N PACKAGES
GND INPUT INPUT V–
1 2 3 4
8 7 6 5
V+ OUTPUT BAL/STROBE BALANCE
+ –
APPLICATIONS
FEATURES
Operates from single 3V supply (LM311B) Maximum input bias current: 150nA (LM311—250nA) Maximum offset current: 20nA (LM311—50nA) Differential input voltage range: ±30V Power consumption: 135mW at ±15V High sensitivity—200V/mV Zero crossing detector
ORDERING INFORMATION
DESCRIPTION 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-L……
