器件名称: LM5068
功能描述: NEGATIVE VOLTAGE HOT SWAP CONTROLLER
文件大小: 42.06KB 共1页
简 介:LM5068 Negative Voltage Hot-Swap Controller
General Description
The LM5068 hot-swap controller provides intelligent control of power supply connections during the insertion and removal of circuit cards powered by live system backplanes The LM5068 provides both in-rush current control and short-circuit protection functions, and limits power supply transients in the backplane caused by the insertion of additional circuit cards. The LM5068 controls the external N-Channel MOSFET to provide programmable load current limiting and circuit breaker functions using a single external current sense resistor. The LM5068 issues a power good (PWRGD) signal at the conclusion of a successful poweron sequence. Input over-voltage or under-voltage fault conditions will cancel the PWRGD indication. The LM5068-1 and -2 indicate power good as an opendrain active high PWRGD state. The LM5068-3 and -4 indicate power-good as an open-drain active low PWRGD state. The LM5068-1 and -3 latch off after a fault condition is detected while the LM5068-2 and -4 continuously re-try at intervals set by a programmable timer. The LM5068 is available in MSOP-8 package.
PRE LIM IN
Features
ARY
In-rush current limiting for safe board insertion into live backplanes Fast response to over-current fault conditions with active current limiting Wide -10V to -100V input voltage range Programmable Under-voltage and Over-voltage shutdown protection with adjustable hysteresis Programmable Multi-Function Timer for ……
