器件名称: P0220SAMCL
功能描述: MicroCapacitance (MC) SA SIDACtor
文件大小: 148.8KB 共2页
简 介:MicroCapacitance (MC) SA SIDACtor Device
RoHS
¨
These DO-214AA SAMC SIDACtor devices are intended for applications sensitive to load values. Typically, high speed connections, such as Ethernet, xDSL, and T1/E1, require a lower capacitance. CO values for the MicroCapacitance device are 40% lower than a standard SA part. This SAMC SIDACtor series enables equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA968-A (formerly known as FCC Part 68).
Electrical Parameters
Part Number * P0080SAMCL P0220SAMCL P0300SAMCL VDRM Volts 6 15 25 VS Volts 25 32 40 VT Volts 4 4 4 IDRM Amps 5 5 5 IS mAmps 800 800 800 IT Amps 2.2 2.2 2.2 IH mAmps 50 50 50
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. VDRM is measured at IDRM. VS is measured at 100 V/s. Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Surge Ratings in Amps
IPP Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps A 20 Amps 150 Amps 150 10x160 * 10x160 ** Amp……