器件名称: P0300SAMC
功能描述: MicroCapacitance (MC) SA SIDACtor Device
文件大小: 122.15KB 共2页
简 介:MicroCapacitance (MC) SA SIDACtor Device
MicroCapacitance (MC) SA SIDACtor Device
The DO-214AA SA MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values for the MicroCapacitance device are 40% lower than a standard SA part. This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).
Electrical Parameters
Part Number * P0080SA MC P0300SA MC VDRM Volts 6 25 VS Volts 25 40 VT Volts 4 4 IDRM Amps 5 5 IS mAmps 800 800 IT Amps 2.2 2.2 IH mAmps 50 50 CO pF 45 25
* For surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. VDRM is measured at IDRM. VS is measured at 100 V/s. Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
Surge Ratings
IPP 2x10 s Amps 150 IPP 8x20 s Amps 150 IPP 10x160 s Amps 90 IPP 10x560 s Amps 50 IPP 10x1000 s Amps 45 ITSM 60 Hz Amps 20 di/dt Amps/s 500
Series A
http://www.littelfuse.com +1 972-5……