器件名称: SA110A
功能描述: 500 Watt Transient Voltage Suppressors
文件大小: 56.96KB 共5页
简 介:SA5.0(C)A - SA170(C)A
SA5.0(C)A - SA170(C)A
Features
Glass passivated junction. 500W Peak Pulse Power capability on 10/1000 s waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 A above 10V.
1.0 min (25.4)
Dimensions in inches (mm)
0.300 (7.62) 0.230 (5.84)
DO-15
COLOR BAND DENOTES CATHODE EXCEPT BIPOLAR
0.140 (3.56) 0.104 (2.64) 0.034 (0.86) 0.028 (0.71)
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions.
500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings*
Symbol
PPPM IPPM PM(AV) if(surge) Tstg TJ
TA = 25°C unless otherwise noted
Parameter
Peak Pulse Power Dissipation on 10/1000 s waveform Peak Pulse Current on 10/1000 s waveform Steady State Power Dissipation .375 " lead length @ TA = 75°C Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range Operating Junction Temperature
Value
minimum 500 see table 1.0
Units
W A W
(Note 1)
70 -65 to +175 -65 to +175
A °C °C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
1998 Fairchild Semiconductor Corporation
SA5.0(C)A - SA170(C)A, Rev. A
SA5.0(C)A - ……
