器件名称: TL5002
功能描述: PULSE-WIDTH-MODULATION CONTROL CIRCUIT
文件大小: 233.9KB 共14页
简 介:TL5002 PULSE-WIDTH-MODULATION CONTROL CIRCUIT
SLVS304A – SEPTEMBER 2000 – REVISED AUGUST 2002
D D D D D D D
Complete PWM Power Control 3.6-V to 40-V Operation Internal Undervoltage-Lockout Circuit Oscillator Frequency . . . 20 kHz to 500 kHz Variable Dead Time Provides Control Over Total Range Ideal Controller for DDR Memory Application Uncommitted Error Amplifier Inputs
D PACKAGE (TOP VIEW)
OUT VCC COMP INV
1 2 3 4
8 7 6 5
GND RT DTC NI
description
The TL5002 incorporates on a single monolithic chip all the functions required for a pulse-width-modulation (PWM) control circuit. Designed primarily for power-supply control, the TL5002 contains an error amplifier, a regulator, an oscillator, a PWM comparator with a dead-time-control input, undervoltage lockout (UVLO), and an open-collector output transistor. The error-amplifier input common-mode voltage ranges from 0.9 V to 1.5 V. Dead-time control (DTC) can be set to provide 0% to 100% dead time by connecting an external resistor between DTC and GND. The oscillator frequency is set by terminating RT with an external resistor to GND. During low VCC conditions, the UVLO circuit turns the output off until VCC recovers to its normal operating range. The TL5002 is characterized for operation from – 40°C to 85°C.
AVAILABLE OPTIONS TA – 20°C to 85°C – 40°C to 85°C SMALL OUTLINE (D) TL5002CD TL5002ID
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL5002CDR).
functional block diagram
VC……