器件名称: AAT3113
功能描述: High Efficiency 1.5X Fractional Charge Pumps For White LED Applications
文件大小: 330.66KB 共15页
简 介:High Efficiency 1.5X Fractional Charge Pumps For White LED Applications General Description
The AAT3113 and AAT3114/14A are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The devices can be used to produce current levels up to 20mA for each output from a 2.7V to 5.5V input. A low external parts count (two 1F flying capacitors and two small bypass capacitors at VIN and OUT) makes these devices ideally suited for small, battery-powered applications. AnalogicTech’s Simple Serial Control (S Cwire) interface is used to enable, disable, and set the LED drive current for 32-level logarithmic scale LED brightness control. AAT3113 and AAT3114/14A devices have a thermal management system for protection in the event of a short-circuit condition on any of the output pins. Built-in soft-start circuitry prevents excessive inrush current during start-up. A high switching frequency enables the use of small external capacitors. A low-current shutdown feature disconnects the load from VIN and reduces quiescent current to less than 1A. The AAT3113 provides four LED current source outputs, and the AAT3114/14A provides six. The AAT3113 is available in a Pb-free 12-pin TSOPJW package, and the AAT3114/14A is available in a Pb-free 16-pin QFN package.
2
AAT3113, AAT3114/14A
ChargePump
Features
AAT3113: Four Outputs AAT3114/14A: Six Outputs 20mA Full-Scale Current Simple Serial Cont……