器件名称: 201142B
功能描述: SAW Bandpass Filter
文件大小: 198.9KB 共5页
简 介:SAW Bandpass Filter 201142B
1. Features
z z z z z z IF Bandpass Filter High Attenuation Single-Ended Operation DIP Package Maximum Storage Temperature Range : -40℃ ~ 85℃ Electrostatics Sensitive Device (ESD)
2. Package Dimension
A=5.0±0.2
25.5±0.5
5.5max 6.0max
20.3±0.2
ITF 04A001 201142B
38.3±0.5
15.2±0.2
0.45±0.05
A
Package : D3825
Pin Configuration 1 Input Output Ground Case ground
Dimensions shown are nominal in millimeters Base : Fe(SPCC), Au plating over Ni plated Cap : Cu & Cr Alloy, Ni Plated Termination : Kovar, Au Plated
6 2, 5 Other
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
201140B 2004-04-19 NI0007-CS04 1/5
A
22.8±0.2
A
SAW Bandpass Filter 201142B
3. Specifications
Fo = 70.0 MHz Terminating source impedance Terminating load impedance : 50Ω and matching network : 50Ω and matching network
Minimum Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Amplitude Ripple (Fo +/- 4.675 MHz) Group Delay Variation (Fo +/- 4.675 MHz) Absolute Delay Ultimate Rejection Temperature Coefficient of Frequency MHz dB MHz MHz MHz dB Nsec Usec dB ppm/°C 69.96 10.0 50 -
Typical 70.0 23.5 9.8 10.1 11.13 1.0 100 3.18 55 -94
Maximum 70.04 25.0 11.25 1.2 150 -
Notes : 1) 2) 3) All specifications are based on the matching schematic shown below All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperatur……