器件名称: I3DB18F1320R1
功能描述: ICEPIC 3 Daughterboards
文件大小: 61.97KB 共1页
简 介:ICEPIC 3 Daughterboards
Introduction
Many thanks for purchasing this ICEPIC3 daughterboard. The ICEPIC 3 manual is supplied in electronic format on the CD supplied with the In-Circuit Emulator. Current revisions of the manual can also be downloaded from the RF solutions website.
I3DB16F84AR1 I3DB18F1320R1
Installation of Daughter Board
1. Installation of a daughter board is a simple push fit onto the topside of the ICEPIC3 motherboard, connecting only by the two connectors. It is only possible to fit the daughter board in a single orientation. 2. Ensure the Target header cables are securely inserted.
Jumper Link Configuration
There are several Jumper Links, which are used to configure your daughter board. These are all fitted to factory default settings during manufacture. A jumper link guide is installed along with the ICEPIC III software. This can be accessed from the windows start menu, Start -> Programs -> ICEPIC III -> ‘Jumper Links.pdf’
Target Board Connectors
The daughterboard target board connectors are for use with the packages given in the table below. Daughterboard I3DB16F84AR1 P8 P3 I3DB18F1320R1 P4 18 Pin DIP 18 Pin DIP 20 Pin SOIC Connector P4 Target Board Package 20 Pin SOIC
Warning
Extra care is therefore advised when handling the ICEPIC system, in particular the ICEPIC Daughterboards. Always apply Power to the ICEPIC pod BEFORE the target board and remove power from the ICEPIC after the target board. Care must be taken to avoid exposing the Target probe ……