器件名称: AT25320B-MAHL-T
功能描述: serial electrically-erasable programmable read-only memory
文件大小: 1253.37KB 共26页
简 介:Features
Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1)
– Datasheet Describes Mode 0 Operation
Low-voltage and Standard-voltage Operation
– 1.8 (VCC = 1.8V to 5.5V) 20MHz Clock Rate (5V) 32-byte Page Mode Block Write Protection – Protect 1/4, 1/2, or Entire Array Write Protect (WP) Pin and Write Disable Instructions for Both Hardware and Software Data Protection Self-timed Write Cycle (5ms max) High Reliability – Endurance: One Million Write Cycles – Data Retention: 100 Years Green (Pb/Halide-free/RoHS Compliant) Packaging Options Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
SPI Serial EEPROMs 32K (4096 x 8) 64K (8192 x 8) Atmel AT25320B AT25640B
Description
The Atmel AT25320B/640B provides 32768-/65536-bits of serial electrically-erasable programmable read-only memory (EEPROM) organized as 4096/8192 words of 8-bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT25320B/640B is available in space-saving 8-lead JEDEC SOIC, 8-lead UDFN, 8-lead XDFN, 8-lead TSSOP, and 8-ball VFBGA packages. The AT25320B/640B is enabled through the Chip Select pin (CS) and accessed via a three-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock (SCK). All programming cycles are completely self-timed, and no separate erase cycle is required before write. Table 0-1.
Pin Name CS SCK SI SO GND VCC ……