器件名称: R&S®BCDRIVE 广播驱动测试软件
功能描述: R&S®BCDRIVE广播驱动测试软件可控制一台或多台R&S®ETL 电视分析仪,其中包括一个GPS接收机,能高效的对多种地面广播标准进行覆盖率分析。
文件大小: 886.88KB 共12页
简 介:R&SBCDRIVE Broadcast Drive Test Software Efficient coverage analysis for terrestrial broadcast signals
Broadcasting
Product Brochure | 02.00
R&SBCDRIVE Broadcast Drive Test Software At a glance
The R&SBCDRIVE broadcast drive testsoftware controls one or more R&SETL or R&SETH TVanalyzers, including one GPS receiver, in order to efficiently analyze coverage for a large number of terrestrial broadcast standards.
Reliable coverage of specific regions is of central importance for terrestrial broadcast network operators. They use complex simulation programs during the planning phase to predict the coverage that will be provided by planned transmitter sites. However, because it is impossible to make a detailed determination of a region's complex propagation characteristics in advance, a series of real field measurements are needed after commissioning to verify that the planned network coverage was achieved.
The R&SBCDRIVE broadcast drive test software manages this task quickly with a minimum of resources. Depending on the number of frequencies to be measured in parallel, the program can control one or more R&SETL or R&SETH TV analyzers to quickly and accurately perform the measurements needed for quality assessment and root cause analysis in accordance with a variety of terrestrial broadcast standards. The software can be run directly on the R&SETL so that an additional controller is not required during the drive test. All that is needed are a USB GPS receiver and the corresp……