器件名称: AT45DB041B-SC
功能描述: 4-megabit 2.5-volt Only or 2.7-volt Only DataFlash
文件大小: 233.48KB 共33页
简 介:Features
Single 2.5V - 3.6V or 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible 20 MHz Max Clock Frequency Page Program Operation – Single Cycle Reprogram (Erase and Program) – 2048 Pages (264 Bytes/Page) Main Memory Supports Page and Block Erase Operations Two 264-byte SRAM Data Buffers – Allows Receiving of Data while Reprogramming of Nonvolatile Memory Continuous Read Capability through Entire Array Low Power Dissipation – 4 mA Active Read Current Typical – 2 A CMOS Standby Current Typical Hardware Data Protection Feature 100% Compatible to AT45DB041 and AT45DB041A 5.0V-tolerant Inputs: SI, SCK, CS, RESET, and WP Pins Commercial and Industrial Temperature Ranges
4-megabit 2.5-volt Only or 2.7-volt Only DataFlash AT45DB041B
Description
The AT45DB041B is a 2.5-volt or 2.7-volt only, serial interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. Its 4,325,376 bits of memory are organized as 2048 pages of 264 bytes each. In addition to the main memory, the AT45DB041B also contains two SRAM data buffers of 264 bytes each. The buffers allow receiving of data while a page in the main memor y is being reprogrammed, as well as reading or writing a continuous data stream. EEPROM emulation (bit or byte alterability) is easily handled with a self-
Pin Configurations
Pin Name CS SCK SI SO WP RESET RDY/BUSY Function Chip Select Serial Clock Serial Input Serial Output Hardware Page Writ……
