器件名称: 74HC173
功能描述: Quad D-type flip-flop; positive-edge trigger; 3-state
文件大小: 69.04KB 共10页
简 介:INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT173 Quad D-type flip-flop; positive-edge trigger; 3-state
Product specication File under Integrated Circuits, IC06 December 1990
Philips Semiconductors
Product specication
Quad D-type ip-op; positive-edge trigger; 3-state
FEATURES Gated input enable for hold (do nothing) mode Gated output enable control Edge-triggered D-type register Asynchronous master reset Output capability: bus driver ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT173 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT173 are 4-bit parallel load registers with clock enable control, 3-state buffered outputs (Q0 to Q3) and master reset (MR). When the two data enable inputs (E1 and E2) are LOW, the data on the Dn inputs is loaded into the register QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
74HC/HCT173
synchronously with the LOW-to-HIGH clock (CP) transition. When one or both En inputs are HIGH one set-up time prior to the LOW-to-HIGH clock transition, the register will retain the previous data. Data inputs and clock enable inputs are fully edge-triggered and must be stable only one set-up time prior to the LOW-……