器件名称: MOC2R60-10
功能描述: OPTOISOLATOR 2 AMPS RANDOM-PHASE TRIAC OUTPUT 600 VOLTS
文件大小: 228.84KB 共8页
简 介:MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MOC2R60–10/D
Advance Information
POWER OPTO Isolator
2 Amp RandomPhase Triac Output
This device consists of a gallium arsenide infrared emitting diode optically coupled to a random phase triac driver circuit and a power triac. It is capable of driving a load of up to 2 amps (rms) directly, on line voltages from 20 to 280 volts AC (rms). Provides Normally Open Solid State AC Output with 2 Amp Rating 70 Amp Single Cycle Surge Capability Phase Controllable High Input-Output Isolation of 3750 vac (rms) Static dv/dt Rating of 400 Volts/s Guaranteed 2 Amp Pilot Duty Rating Per UL508 W117 (Overload Test) and W118 (Endurance Test) [File No. 129224] CSA Approved [File No. CA77170-1]. VDE Approval in Process. Exceeds NEMA 2-230 and IEEE472 Noise Immunity Test Requirements (See Figure 17) DEVICE RATINGS (TA = 25°C unless otherwise noted)
Rating INPUT LED Forward Current — Maximum Continuous Forward Current — Maximum Peak (PW = 100s, 120 pps) Reverse Voltage — Maximum OUTPUT TRIAC Output Terminal Voltage — Maximum Transient (1) Operating Voltage Range — Maximum Continuous (f = 47 – 63 Hz) On-State Current Range (Free Air, Power Factor ≥ 0.3) Non-Repetitive Single Cycle Surge Current — Maximum Peak (t = 16.7 ms) Main Terminal Fusing Current (t = 8.3 ms) Load Power Factor Range Junction Temperature Range TOTAL DEVICE Input-Output Isolation Voltage — Maximum (2) 47 – 63 Hz, 1 sec Duration Thermal Resistance — Power Tr……