器件名称: SA306-IHZ
功能描述: 3 Phase Switching Amplifier
文件大小: 885.6KB 共14页
简 介:Pro rr oo m od du u cc tt IIn nn noovvaatti ioonn FF m
SA306 SA306
DESCRIPTION
3 Phase Switching Amplifier
FEATURES
Low cost 3 phase intelligent switching amplifier Directly connects to most embedded Microcontrollers and Digital Signal Controllers Integrated gate driver logic with dead-time generation and shoot-through prevention Wide power supply range (8.5V to 60V) Over 15A peak output current per phase 5A continuous output current per phase 8A continuous for A-Grade (SA306A) Independent current sensing for each output User programmable cycle-by-cycle current limit protection Over-current and over-temperature warning signals
The SA306 is a fully integrated switching amplifier designed primarily to drive three-phase Brushless DC (BLDC) motors. Three independent half bridges provide over 15 amperes peak output current under microcontroller or DSC control. Thermal and short circuit monitoring is provided, which generates fault signals for the microcontroller to take appropriate action. A block diagram is provided in Figure 1. Additionally, cycle-by-cycle current limit offers user programmable hardware protection independent of the microcontroller. Output current is measured using an innovative low loss technique. The SA306 is built using a multi-technology process allowing CMOS logic control and complementary DMOS output power devices on the same IC. Use of P-channel high side FETs enables 60V operation without bootstrap or charge pump circuitry. The Power Quad sur……