器件名称: ADVFC32BH
功能描述: Voltage-to-Frequency and Frequency-to-Voltage Converter
文件大小: 141.29KB 共6页
简 介:a
FEATURES High Linearity 0.01% max at 10 kHz FS 0.05% max at 100 kHz FS 0.2% max at 500 kHz FS Output TTL/CMOS Compatible V/F or F/V Conversion 6 Decade Dynamic Range Voltage or Current Input Reliable Monolithic Construction MIL-STD-883 Compliant Versions Available
Voltage-to-Frequency and Frequency-to-Voltage Converter ADVFC32
PIN CONFIGURATION (TOP VIEW) “N” Package
PRODUCT DESCRIPTION
The industry standard ADVFC32 is a low cost monolithic voltage-to-frequency (V/F) converter or frequency-to-voltage (F/V) converter with good linearity (0.01% max error at 10 kHz) and operating frequency up to 0.5 MHz. In the V/F configuration, positive or negative input voltages or currents can be converted to a proportional frequency using only a few external components. For F/V conversion, the same components are used with a simple biasing network to accommodate a wide range of input logic levels. TTL or CMOS compatibility is achieved in the V/F operating mode using an open collector frequency output. The pullup resistor can be connected to voltages up to 30 volts, or to +15 V or +5 V for conventional CMOS or TTL logic levels. This resistor should be chosen to limit current through the open collector output to 8 mA. A larger resistance can be used if driving a high impedance load. Input offset drift is only 3ppm of full scale per °C, and fullscale calibration drift is held to a maximum of 100 ppm/°C (ADVFC32BH) due to a low T.C. Zener diode. The ADVFC32 is available in commercial, indu……