器件名称: AK5381
功能描述: 24bit 96kHz A/D converter
文件大小: 173.49KB 共20页
简 介:ASAHI KASEI
[AKD5381-B]
AKD5381-B
AK5381 Evaluation Board Rev.1
GENERAL DESCRIPTION AKD5381-B is an evaluation board for the digital audio 24bit 96kHz A/D converter, AK5381. AKD5381-B has analog input circuits and a digital interface transmitter,and can achieve the interface with digital audio systems via opt-connector. Ordering guide
AKD5381-B --AK5381 Evaluation Board
FUNCTION DIT (AK4114) with optical output
VA,VD
AGND,DGND
LIN
RIN
AK5381
AK4114 (DIT)
Opt Out
DSP Data 10pin Header
Figure 1. AKD5381-B Block Diagram * Circuit diagram and PCB layout are attached at the end of this manual.
-1-
2006/04
ASAHI KASEI
[AKD5381-B]
1. Evaluation Board Manual Operation sequence
1) Set up the power supply lines. [VA] (red) = 2.7 5.5V or +15V [VD] (orange) = 2.7 5.5V [VCC] (red) = 3.3V [AGND] (black) = 0V [DGND] (black) = 0V
: for VA of AK5381 (typ. 5.0V) : for VD of AK5381, 74HC14 (typ. 5.0V) : for AK4114 : for analog ground : for logic ground
Each supply line should be distributed from the power supply unit. 2) Set up the evaluation mode, jumper pins and DIP switches. (See the followings.) 3) Power on. The AK5381 and AK4114 should be reset once bringing SW2 = “L” upon power-up.
Evaluation mode
(1) Slave Mode (1-1) A/D evaluation using DIT function of AK4114 PORT2 (DIT) is used. DIT generates audio bi-phase signal from received data and which is output through optical connector (TOTX141). It is possible to connect AKM’s D/A converter evaluation boar……