器件名称: 28F256
功能描述: 256 Kilobit (32 K x 8-Bit) CMOS 12.0 Volt, Bulk Erase Flash Memory
文件大小: 493.47KB 共35页
简 介:FINAL
Am28F256
256 Kilobit (32 K x 8-Bit) CMOS 12.0 Volt, Bulk Erase Flash Memory
DISTINCTIVE CHARACTERISTICS
s High performance — 70 ns maximum access time s CMOS Low power consumption — 30 mA maximum active current — 100 A maximum standby current — No data retention power consumption s Compatible with JEDEC-standard byte-wide 32-Pin EPROM pinouts — 32-pin PDIP — 32-pin PLCC — 32-pin TSOP s 10,000 write/erase cycles minimum s Write and erase voltage 12.0 V ±5% s Latch-up protected to 100 mA from –1 V to V CC +1 V s Flasherase Electrical Bulk Chip-Erase — One second typical chip-erase s Flashrite Programming — 10 s typical byte-program — 0.5 second typical chip program s Command register architecture for microprocessor/microcontroller compatible write interface s On-chip address and data latches s Advanced CMOS flash memory technology — Low cost single transistor memory cell s Automatic write/erase pulse stop timer
GENERAL DESCRIPTION
The Am28F256 is a 256 K Flash memory organized as 32 Kbytes of 8 bits each. AMD’s Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The Am28F256 is packaged in 32-pin PDIP , PLCC, and TSOP versions. It is designed to be reprogrammed and erased in-system or in standard EPROM programmers. The Am28F256 is erased when shipped from the factory. The standard Am28F256 offers access times as fast as 70 ns, allowing operation of high-speed microprocessors without wait states. To eliminate bus content……
